The G616 rugged GPS tracker is a professional-grade telematics device engineered for enterprise fleet management and Plaspy compatible integrations. Designed for reliable real-time tracking, accident reconstruction, and insurance telematics, the G616 combines multi‑GNSS precision, LTE Cat‑1 and 2G worldwide connectivity, high-rate crash data capture and a rich set of vehicle I/O to meet demanding dispatch, recovery and fleet analytics requirements.
The G616 is ideal for service providers and integrators who need a Plaspy compatible GPS tracker that delivers telemetry, ignition monitoring and extensible sensor support (including Bluetooth sensors and fuel sensors). Its rugged electrical and mechanical design, FOTA capability and internal antenna options make installation and remote management straightforward across large vehicle fleets.
Key Highlights
- Plaspy compatible GPS tracker with LTE Cat‑1 connectivity and GSM/GPRS fallback for reliable global coverage and real-time tracking.
- Multi‑GNSS engine (GPS/GLONASS/Galileo/BeiDou) with SBAS accuracy down to 2.0 m in open sky for precise vehicle location and route verification.
- High-resolution crash and driving data capture: up to 100 Hz crash sensing combined with GPS updates at 4 Hz for accurate accident reconstruction and driver behavior analysis.
- Extensive vehicle I/O — ignition sense, analog and digital inputs, open‑drain outputs and a latched output — enabling telemetry, immobilizer implementations and custom integrations.
- BLE 4.2 support for wireless sensors and accessories (temperature, asset tags), plus RS232 and 1‑Wire® for driver ID and peripheral connectivity.
- Low power design for 12V/24V vehicle systems with optional internal LI‑PO backup battery and very low sleep currents to preserve vehicle battery.
- FOTA (firmware over‑the‑air) updates and onboard storage for scalable remote management and firmware maintenance across a fleet.
How It Works with Plaspy
When integrated with Plaspy, the G616 streams location, telemetry and event data using TCP/UDP or SMS data modes, enabling real-time tracking, historical playback and configurable alerts. Plaspy reads high-frequency telemetry and crash logs to build driver profiles, trigger geofence alerts and produce compliance or insurance reports. The device’s flexible I/O and BLE support allow Plaspy to ingest ignition status, sensor data and remote control events for actionable fleet insights.
- Real-time location and telemetry updates via LTE Cat‑1 (with GSM/GPRS fallback) to Plaspy for live map tracking and route replay.
- Ignition status and input monitoring (ignition‑sense line and configurable digital/analog inputs) for accurate engine run-time and route segmentation.
- Fuel monitoring and sensor telemetry when paired with compatible fuel sensors; Plaspy displays fuel trends and alerts for consumption anomalies.
- Remote immobilizer capability using configurable outputs and a latched output, enabling Plaspy to issue immobilize/unlock commands through vehicle wiring.
- Bluetooth sensors and beacons (BLE 4.2) for temperature, door/movement detection or driver presence; Plaspy integrates BLE telemetry into fleet dashboards.
Technical Overview
| Connectivity | LTE Cat‑1 and 2G (GSM/GPRS) with TCP/UDP/SMS data modes |
|---|---|
| Bands | LTE Cat‑1 band support across global bands (plus GSM/GPRS fallback) |
| Power & Battery | Operating voltage 8–40 V DC (supports 12V & 24V systems); low sleep & power‑save currents (~3 mA sleep, 60 mA power save, 120 mA active); optional LI‑PO 220 mAh backup battery |
| Interfaces | 2 digital inputs, 1 ignition sense, 1 programmable input (analog/negative trigger), 1 analog input, 2 digital outputs (open‑drain, 300 mA), 1 latched output (150 mA), RS232 serial port, 1‑Wire® driver ID, status LEDs |
| GNSS | Multi‑GNSS (GPS/GLONASS/Galileo/BeiDou) with SBAS; concurrent tracking of up to 3 GNSS systems; GPS updates at 4 Hz; tracking sensitivity -162 dBm; position accuracy to ~2.0 m in open sky |
| Bluetooth | BLE 4.2 for wireless sensors and beacons |
| Remote Management | FOTA (firmware over‑the‑air) updates; onboard flash (4 Mbit ~ ability to store ~8,000 records) |
| Onboard Sensors & CPU | 3D accelerometer for crash sensing; ARM Cortex‑M3 CPU |
| Ruggedness & Environment | Meets SAE J1455, MIL‑STD shock & vibration, SAE J1113; FCC Part 15B; operating range –40°C to +85°C (without backup battery) |
| Form Factor | Compact: 80 × 52 × 26 mm; internal patch GPS antenna and internal cellular antenna; mounting via tie‑wrap, velcro or adhesive |
Use Cases
- Fleet management and dispatch: real‑time tracking, route optimization and telemetry feeds for large vehicle fleets using Plaspy dashboards.
- Anti‑theft and vehicle recovery: live location, configurable geofence alerts (up to 200 hardware geofences) and remote immobilizer control via outputs.
- Insurance telematics and accident reconstruction: high‑rate crash data (100 Hz) with GPS 4 Hz updates for precise event timelines and driving behavior scoring.
- Fuel monitoring and preventive maintenance: integrate fuel sensors and analog inputs to Plaspy for consumption monitoring and engine‑run diagnostics.
- Driver ID and auxiliary sensors: 1‑Wire® driver ID, BLE sensors and RS232 peripherals for seat‑level or cargo monitoring and validated driver logs.
Why Choose This Tracker with Plaspy
For integrators and fleet operators choosing a Plaspy compatible GPS tracker, the G616 stands out for its balance of accuracy, ruggedness and I/O flexibility. Its multi‑GNSS precision and crash‑grade accelerometer provide the telemetry and safety data that insurers and fleet managers demand. LTE Cat‑1 connectivity with GSM fallback and low power consumption ensure persistent real‑time tracking across 12V and 24V vehicles. The device’s programmable inputs/outputs, BLE 4.2 support and available accessories (battery packs, microphones, panic buttons, fuel sensors and iButton kits) make it simple to tailor solutions for anti‑theft, telemetry, fuel monitoring and immobilizer workflows within Plaspy.
Combined with FOTA for remote firmware management and robust onboard storage for intermittent connectivity, the G616 delivers a dependable platform for scalable fleet management, real‑time tracking and telematics analytics on Plaspy — enabling operations teams to reduce risk, improve utilization and respond faster to incidents.
Set Up G616
Use with a tracker
-
Set the Operator APN
CountryCarrierAPNinternet.comcel.com.coUserCOMCELWEBPasswordCOMCELWEB
- Check your tracker clock setup is set UTC-0 or GMT. (The most trackers come from the factory on UTC.)
- For most devices you should use IMEI (International Mobile Equipment Identity) number as unique identifier. However, some devices have vendor specific unique identifier, for example TK-103 devices use 11-digit identifier.
-
Set Up the IP and port on your tracker: (automatic detect tracker's protocol.)
IP 54.85.159.138 Port 8888 - Add on your Account on devices with the IMEI or unique ID.