The Queclink GV300CAN is a third‑generation vehicle GPS tracker designed for robust fleet management, cold‑chain logistics and transportation monitoring. Flotas control compatible out of the box, the GV300CAN pairs reliable GNSS positioning from a u‑blox All‑in‑One receiver with GSM/GPRS communication to deliver real‑time tracking, scheduled telemetry and event‑driven reporting for fleets and high‑value vehicles.
Built for integration, the GV300CAN supports TCP/UDP and SMS transport and Queclink’s proprietary @Track protocol, enabling Flotas control to ingest location, CANBus vehicle data, alarms and sensor telemetry. The unit’s expandable I/O, CAN/J1708 support and onboard accelerometer make it practical for anti‑theft workflows, fuel monitoring, crash detection and remote immobilizer control when managed through Flotas control.
Key Highlights
- Flotas control compatible GPS tracker for accurate, real‑time tracking of vehicles and assets.
- GNSS performance from a u‑blox All‑in‑One receiver with position accuracy <2.5 m CEP and sensitivity to −162 dBm.
- Quad‑band GSM/GPRS (850/900/1800/1900 MHz) with TCP/UDP/SMS transport for continuous telemetry and scheduled reporting.
- CANBus and J1708 support for direct vehicle telemetry — integrate engine, speed and diagnostic data into Flotas control.
- Extensive alarm set including geo‑fence, parking, tow, crash detection and low backup battery alerts for timely incident response.
- Configurable fuel level sensing and temperature monitoring via 1‑wire sensors to support cold‑chain monitoring and fuel management.
- Remote control of digital outputs for immobilizer workflows and anti‑theft response when combined with Flotas control command-and-control.
- Compact, rugged form factor with wide operating voltage (8–32 V DC) for versatile vehicle installation.
How It Works with Flotas control
When integrated with Flotas control, the GV300CAN streams GNSS positions, CANBus frames and digital/analog input events into Flotas control’s real‑time tracking and reporting platform. Flotas control uses the device’s TCP/UDP or SMS transport to receive scheduled updates by time, distance or mileage, and to trigger alerts and automated workflows based on incoming telemetry.
- Real‑time location and telemetry updates delivered via TCP/UDP or SMS to Flotas control for live map tracking.
- CANBus/J1708 vehicle data capture relayed to Flotas control for engine status, speed and diagnostic telemetry.
- Fuel monitoring and temperature telemetry available to Flotas control through analog inputs and 1‑wire sensors for cold‑chain and fuel optimization.
- Remote immobilizer and digital output control — Flotas control can issue commands to lock or disable vehicles when required.
- Bluetooth (BLE) antenna support facilitates integration with BLE sensors and beacons where used alongside Flotas control monitoring.
Technical Overview
| Connectivity | GSM/GPRS (quad‑band), TCP/UDP/SMS transport; Queclink @Track protocol |
|---|---|
| Bands | Quad‑band GSM: 850 / 900 / 1800 / 1900 MHz (GPRS multi‑slot class 10) |
| Power & Battery | Operating voltage 8–32 V DC; internal 250 mAh Li‑Polymer backup battery; low backup battery alarm |
| Interfaces | RS232 (16‑pin Molex), 1 positive + 2 negative digital inputs, 1 analog input (0–12 V or 0–30 V selectable), 1 digital output + 1 latched digital output (open drain, 150 mA max), mini USB |
| GNSS | u‑blox All‑in‑One receiver; sensitivity to −162 dBm; position accuracy <2.5 m CEP; internal/external GNSS antenna support |
| Bluetooth | Internal GSM/BLE antenna support (enables BLE sensor/beacon integration where used) |
| Remote Management | Remote OTA control of digital outputs; mini USB for debugging and firmware upgrades; protocol support for remote reporting and commands |
| Form Factor | 80 × 48 × 25 mm; 72 g; operating temp −30 °C to +80 °C (storage −40 °C to +80 °C) |
| Certifications & Warranty | FCC, CE, E‑Mark, Anatel; one‑year warranty for affected customers and lifetime technical support from Queclink |
Use Cases
- Fleet management: continuous location, driver events and CAN telemetry feed Flotas control dashboards for route compliance and utilization analytics.
- Cold‑chain logistics: temperature monitoring via 1‑wire sensors and scheduled reporting keeps perishable shipments visible inside Flotas control.
- Anti‑theft and immobilization: geo‑fence, tow and low battery alarms plus remote digital output control enable fast intervention through Flotas control.
- Fuel monitoring and telemetry: analog fuel level sensing and CAN data help reduce fuel loss and support cost tracking in Flotas control reports.
- Incident capture and reconstruction: built‑in 3‑axis accelerometer and crash detection provide event data for post‑incident analysis.
Why Choose This Tracker with Flotas control
The GV300CAN offers a balanced mix of vehicle‑grade hardware and flexible interfaces that make it a practical choice for Flotas control customers focused on real‑time tracking, telemetry and anti‑theft workflows. Its CAN/J1708 support lets Flotas control ingest detailed vehicle data alongside GNSS positions, while configurable alarms and inputs support use cases from cold‑chain temperature monitoring to fuel management and immobilization. The compact form factor, wide voltage range and rugged operating environment simplify installation across mixed fleets.
Note on lifecycle: Queclink announced a 2G phase‑out End‑of‑Life for the GV300CAN (2G phase out in June 2022). Queclink provides one‑year warranty coverage for affected customers and lifetime technical support; the manufacturer recommends the GV350CEU as an alternative for 2G phase‑out scenarios. Flotas control users should evaluate network compatibility and migration plans as part of long‑term fleet rollouts.
Set Up GV300CAN
To set the tracker send the following commands by SMS messages, the sample setup the device password is 3bgi2jOM, this password is the default
- Restore factory settings
AT+GTRTO=3bgi2jOM,4,,,,,,FFFF$ - Set the time zone UTC-0
AT+GTTMA=3bgi2jOM,+,0,0,0,,,,,,FFFF$ - Set the operator APN
AT+GTBSI=3bgi2jOM,{{apn}},{{apnu}},{{apnp}},,,,,FFFF$ - Set the GPRS server
AT+GTSRI=3bgi2jOM,4,,1,d.plaspy.com,8888,54.85.159.138,8888,,0,0,0,,,,FFFF$ - Set the update interval 60 seconds.
AT+GTFRI=3bgi2jOM,1,1,0,0,,,60,60,60,60,7F,40,0,,,FFFF$ - Enable SOS button notification input 2
AT+GTSOS=3bgi2jOM,2,2,,0,0,0,0,0,0,,,FFFF$